Chademo im Fluence

Re: Chademo im Fluence

USER_AVATAR
  • Andi42
  • Beiträge: 334
  • Registriert: Mo 20. Jul 2015, 14:00
  • Hat sich bedankt: 1 Mal
  • Danke erhalten: 57 Mal
read
Hi, as already posted these are the messages 0x428 and 0x4F7. Unfortunately I only partly know the meaning of these two messages.
So what I did is to replicate the messages from the charger in four states:
No charge -> Charge (see diagram)

Message 0x429 is static and can be replaced by exactly that Byte array shown in the diagram
Message 0x1C7 is containing the interlock states of the connectors of the BCB in B0/B1 and in addition the Pack Voltage. You can send B0/B1 static as depicted (=all connectors connected) and the pack Voltage dynamically (not sure what module needs this message).

Message 0x444 is not part of the Renault protocol. I use this address for communication between my two controllers.

I can share my PCB Design, please send me a PM.

Cheers
Andreas
Dateianhänge
Charger_States.JPG
Fluence Z.E. seit 12/2015 | Corbin Sparrow seit 09/2011 | Kewet ElJet3 von 10/2005 - 02/2016 | Peugeot Scootelec
Anzeige

Re: Chademo im Fluence

Alexei1388
  • Beiträge: 1
  • Registriert: Fr 25. Dez 2020, 06:20
  • Hat sich bedankt: 1 Mal
read
Andi 42, hello, very good project, I also want in my Fluence, do you sell such a board?
AntwortenAntworten

Zurück zu „Fluence Z.E. - Laden, Ladeequipment“

Gehe zu Profile
  • Vergleichbare Themen
    Antworten
    Zugriffe
    Letzter Beitrag